Free shipping on all orders over $50
7-15 days international
11 people viewing this product right now!
30-day free returns
Secure checkout
72781645
This EC5 smart car jumper cable is used for car emergency start. Usage of intelligent ignition wire: After this cable is plugged into the battery, the traffic lights flash alternately, indicating that the battery voltage is normal and the ignition action can be started; If only the red light is on, it indicates that the battery voltage is too low for ignition. When the traffic light flashes alternately, it is clamped to the power line of the waiting train (it is the same when the battery of the original vehicle is disconnected or not), and self-test for 5 seconds. If the green light of this line is always on, it indicates that the ignition circuit of the vehicle is normal and ignition can be started. The green light is always on and the state is maintained for 30 seconds. If the ignition is not ignited within 30 seconds, it will automatically return to the self inspection state in which the traffic lights flash alternately. After ignition, if the engine starts normally, the on-board generator will generate electricity. In order to prevent reverse charging, this line will be automatically turned off, the red light will be on and the buzzer will sound. When the traffic lights flash alternately, if there is any of the following error conditions, this line will be automatically turned off, the red light will be on, and the buzzer will sound: A. If a red black clip short circuit is detected; B. If it is detected that the red and black clips are connected reversely. Precautions: When the green light of this line is always on, it indicates that it is in the state of waiting for ignition. At this time, it is absolutely not allowed to release the clip and take it out of the vehicle Down! Be sure to unplug the battery before releasing the clip! Details The clamps The smart battery clip adopts the updated tight wrapping technology, which will not cause safety accidents Black is connected to the negative pole of the car battery, and red is connected to the positive pole . The use of thickened steel spring, clamp clamping force, long-term use is not easy to deform . Safety inner core Red light: wrong connection, reverse connection cannot be started, Green light: connected correctly, can start Receive anti warning light . After the battery clip is connected to the power supply and the car battery, the traffic lights will flash alternately and make a drip sound, and then one of the lights will light up The OD interface The o-port is negative and the D-port is positive Anti reverse plug design is adopted, which is not afraid of reverse plug The surface of the product is made of high-quality ABS material, which is durable and has good insulation effect. The inside is made of copper, which is firm and durable and has better conductive effect . Read more Anti-misconnection design, only the matching plug can be inserted correctly, there are specially designed multi-protection clip, safety and explosion-proof, start the car When the battery clamps properly clamp the car battery When the battery clamp is closed, the red and green lights flash alternately. At this time, the clamp is in the intelligent detection connection section. The green light is always on and can start normally When the power clip positive and negative pole clip back The smart battery holder will sound an alarm, at which point the positive and negative clamps can be adjusted and reconnected to prevent damage to the charging device. SMART CLIP alarm system In any case, the smart clip should separate the power supply from the smart clip in time After starting the car Red Light flashing alarm sounded, at this time the smart clip detected that the car motor has to power recoil Read more Attention: Do not reverse the operation sequence of the jump starter. If the number of battery indicators is less than 3, do not use the jump starter to start the vehicle to prevent damage to the jump starter. Be sure to remove the product from the vehicle within 30 seconds after the vehicle starts, otherwise it may cause safety accidents. Do not connect the two clamps together, otherwise it may cause danger! Keep children away from this device. Read more Emergency response supplies It is an ideal choice for full-size cars, trucks, medium-sized trucks, motorcycles, freight vehicles, etc.
This EC5 car jumper cable is a smart solid alligator clip with EC5 plug connector, which is used for car emergency start.Replacement jump box cables, fits most brands of mini portable jump boxes
Made of high-quality ABS plastic and copper materials, it is firm and durable. Anti reverse charging module design is adopted, which is safe and convenient. The plastic metal battery cable is designed with a module to prevent reverse charging, which is very safe and convenient.
This EC5 to alligator clip clamp is equipped with LED light smart clip and has eight smart protection: 1 Short circuit protection, 2 Reverse connection protection, 3 Reverse charging protection, 4 Over temperature protection, 5 Overcurrent protection, 6 Undervoltage protection, 7 overpressure protection, 8 Automatic recovery of fault state.
Plug and play, direct installation, easy installation without assembly.
Application: the EC5 jump start cable is used together with the automobile jump start device, which is suitable for most automobile jump start devices. It is an ideal choice for full-size cars, trucks, medium-sized trucks, motorcycles, freight vehicles, etc.